Spondylolytic Spondylolisthesis of Cervical Spine / 대한신경손상학회지

Cervical spondylolytic spondylolisthesis is a rare congenital anomaly. It is often misunderstood as a result of trauma. However, most of them are congenital deformities.The vast majority of patients with radiographically proven cervical spondylolysis can be treated confidently with conservative measures. Cervical spondylolytic spondylolisthesis that cause symptoms requiring surgery is very rare. Surgical intervention should be reserved for those who fail non-operative management or exhibit neurologic compromise referable to an unstable spondylolytic defect. We report a case of cervical radiculopathy in a 45-year-old female patient who had been diagnosed with spondylolytic spondylolisthesis at the sixth verterba and treated with surgery.

Are “Unstable” Burst Fractures Really Unstable?

Objective@#: The stability is an important factor to decide the treatment plan in thoracolumbar burst fracture patients. Patients with an unstable burst fracture generally need operative management. Decrease in vertebral body height, local kyphosis, involvement of posterior column, and/or canal compromise are considered important factors to determine the treatment plan. On the other hand, in thoracolumbar injury classification system (TLICS), surgery is recommended in patients with TLICS of more than 5 points. The purpose of this study was to apply the TLICS score in patients with thoracolumbar burst fractures and to distinguish the differences of treatment plan on burst fracture. @*Methods@#: All patients, diagnosed as a thoracolumbar burst fracture between January 2006 and February 2019 were included in this study. Unstable thoracolumbar burst fracture was defined as burst fracture with neurologic deficit, three-column injury, kyphosis over 30 degrees, decrease of anterior body height over 40 percent and canal comprise more than 50%. TLICS score was measured with morphology, neurological involvement and posterior ligamentous complex integrity. The existence of instability was compared with TLICS score. @*Results@#: Total 233 patients (131 men, 102 women) were included in this study. In Denis classification, 51 patients (21.9%) diagnosed as stable burst fracture while 182 patients (78.1%) had unstable burst fracture. According to TLICS, 72 patients (30.9%) scored less than 4, while 161 patients (69.1%) scored 4 or more. All the patients with stable burst fracture scored 2 in TLICS. Twenty-one patients (9.0) scored 2 in TLICS but diagnosed as unstable burst fracture. Thirteen patients had over 40% of vertebra body compression, four patients had more than 50% of canal compromise, three patients had both body compression over 40% and kyphosis over 30 degrees, one patients had both body compression and canal compromise. Fifteen patients presented kyphosis over 30 degrees, and three (20%) of them scored 2 in TLICS. Seventy-three patients presented vertebral body compression over 40% and 17 (23.3%) of them scored 2 in TLICS. Fifty-three patients presented spinal canal compromise more than 50%, and five (9.4%) of them scored 2 in TLICS. @*Conclusion@#: Although the instability of thoracolumbar burst fracture was regarded as a critical factor for operability, therapeutic strategies by TLICS do not exactly match with the concept of instability. According to the concept of TLICS, it should be reconsidered whether the unstable burst fracture truly unstable to do operation.

Burst Fractures as a Result of Attempted Suicide by Jumping / 대한신경손상학회지

OBJECTIVE: Jumping from high place for the purpose of suicide results in various damages to body area. A burst fracture of vertebrae is representative of them and we reviewed eight patients who were diagnosed with spinal burst fracture following suicide falling-down. The demographics, characteristics, performed operation, combined injuries, psychological past histories of the patients were analyzed. METHODS: A retrospective study was made of patients who are diagnosed with vertebral burst fracture from falling-down with the purpose of suicide admitted to department of neurosurgery of the author's hospital, covering the period between 2003 and 2012. RESULTS: Total eight patients were suicidal jumper. There were eleven vertebral burst fractures in eight patients and mean age was 26.5 years old. Seven patients already had psychological past history and there were various combined injuries except vertebrae burst fracture. The ankle fracture such as calcaneus, talus, navicular and malleolus was the most common injury and there were also various combined injury. CONCLUSION: Suicidal jumper is different from incidental faller in some aspects because of different injury mechanism. For managing suicidal jumper, physician had to consider patients' age, affected site, psychiatric problem and combined injuries. Each department related to the injuries of patient have to cooperate each other with departments of psychiatry and rehabilitation from beginning to end.

A Novel Blasted and Grooved Low Profile Pedicle Screw Able to Resist High Compression Bending Loads

OBJECTIVE: Polyaxial pedicle screws are a safe, useful adjunct to transpedicular fixation. However, the large screw head size can cause soft tissue irritation, high rod positioning, and facet joint injury. However, the mechanical resistance provided by small and low profile pedicle screws is very limited. We therefore developed a novel, low profile pedicle screw using grooving and blasting treatment that is able to resist a high compression bending load. METHODS: We evaluated the compression bending force to displacement and yield loads for seven different screw head types that differed with regard to their groove intervals and whether or not they had been blasted. RESULTS: The rank order of screw types that had the greatest compression bending force to displacement was as follows: (1) universal polyaxial, (2) low polyaxial with 0.1mm grooves and blasting, (3) low polyaxial with blasting, (4) low polyaxial with 0.15mm grooves and blasting, (5) low polyaxial with 0.05mm grooves and blasting, (6) low polyaxial with 0.05mm grooves, (7) and low polyaxial. Low polyaxial screws with 0.1mm grooves and blasting had the maximum yield load and highest compression bending force to displacement of all seven polyaxial screw head systems evaluated. CONCLUSION: Blasting and grooving treatment of pedicle screw heads resulted in screw heads with a high yield load and compression bending force relative to displacement because of increased friction. Low polyaxial pedicle screws with 0.1 mm grooves treated by blasting have mechanical characteristics similar to those of universal polyaxial pedicle screws.

A Novel Blasted and Grooved Low Profile Pedicle Screw Able to Resist High Compression Bending Loads

OBJECTIVE: Polyaxial pedicle screws are a safe, useful adjunct to transpedicular fixation. However, the large screw head size can cause soft tissue irritation, high rod positioning, and facet joint injury. However, the mechanical resistance provided by small and low profile pedicle screws is very limited. We therefore developed a novel, low profile pedicle screw using grooving and blasting treatment that is able to resist a high compression bending load. METHODS: We evaluated the compression bending force to displacement and yield loads for seven different screw head types that differed with regard to their groove intervals and whether or not they had been blasted. RESULTS: The rank order of screw types that had the greatest compression bending force to displacement was as follows: (1) universal polyaxial, (2) low polyaxial with 0.1mm grooves and blasting, (3) low polyaxial with blasting, (4) low polyaxial with 0.15mm grooves and blasting, (5) low polyaxial with 0.05mm grooves and blasting, (6) low polyaxial with 0.05mm grooves, (7) and low polyaxial. Low polyaxial screws with 0.1mm grooves and blasting had the maximum yield load and highest compression bending force to displacement of all seven polyaxial screw head systems evaluated. CONCLUSION: Blasting and grooving treatment of pedicle screw heads resulted in screw heads with a high yield load and compression bending force relative to displacement because of increased friction. Low polyaxial pedicle screws with 0.1 mm grooves treated by blasting have mechanical characteristics similar to those of universal polyaxial pedicle screws.

Technical Strategies and Surgical Results of C1 Lateral Mass-C2 Pedicular Screw Fixation in Atlantoaxial Disorders

OBJECTIVE: There are various posterior fusion techniques in managing C1-2 instability. The aim of this study is to evaluate surgical techniques and clinical results including complications of the C1 lateral mass and C2 pedicle screw fixation (C1-2 LMPSF) in atlantoaxial disorders. METHODS: From February 1997 to July 2008, 24 patients were performed C1-2 LMPSF due to C1-2 instability. Pathway of vertebral artery was classified into three groups by 3D-angiogram. Diameter of C1 lateral mass and C2 isthmus on the plain X-ray and CT was measured before operation. Surgical method was divided into four groups according to fixation site (bilateral or unilateral) and bone graft (with or without graft). Stability of C1-2 fixation was postoperatively evaluated by flexion and extension cervical lateral films. We reviewed clinical data, imaging studies and old chart retrospectively as sources for analysis. RESULTS: Among 24 patients, os odontoideum was the most common cause (16 out of 24). Four patients had anomalous vertebral artery. Mean diameters of C1 lateral mass was 9.9(range 4.2~16.4) mm at right side, 10.3 (range 3.4~14.2) mm at left side. Mean diameter of C2 isthmus was 5.8 (range 1.0~10.1) mm at right side and 5.8(range 2.1~8.2) mm at left side. Two patients showed very narrow C2 isthmus. As a result, unilateral C1-2 LMPSF was performed on 6 patients (4 for anomalous vertebral arteries and 2 for narrow C2 isthmus). 12 of 18 patients were with C1-2 interlaminar bone graft and 6 patients without bone graft. All patients showed stable C1-2 fixation by flexion and extension cervical lateral X-ray films taken at least 6 months after surgery. Five out of 8 patients who had preoperative radiculopathy only showed improved symptoms. However, Seven out of 8 patients who had myelopathy showed little neurological improvement . CONCLUSION: For C1-2 LMPSF, preoperative 3D CT-angiogram study is mandatory to identify abnormal vertebral artery and narrow C2 isthmus. Bilateral C1-2 LMPSF without bone graft is enough to obtain stable C1-2 fixation. If there is an abnormal vertebral artery or narrow C2 isthmus, unilateral C1-2 LMPSF with bone graft and wiring is alternative successful method.

Rapid Recurrence of Spinal Idiopathic Hypertrophic Pachymeningitis: A Case Report

Idiopathic hypertrophic pachymeningitis is a rare inflammatory disorder of the dura mater. Spinal involvement is extremely rare and there are few case reports. We present a 36 year-old female of idiopathic hypertrophic spinal pachymeningitis compressing thoracic spinal cord which showed rapid recurrence.